For Immediate Release

Vicor Corporation’s 48V Direct-to-POL (Point of Load) Datacenter Solution Named a Winner of the Prestigious UBM Americas ACE (Annual Creativity in Electronics) Awards in the “Power” Category

2016 ACE Award Winner

For the second year in a row, ACE Awards recognize a Vicor breakthrough innovation in power conversion technology

001x001px_alpha.png
001x001px_alpha.png
001x001px_alpha.png

Andover, MA – December 15, 2016 – Vicor Corporation (NASDAQ: VICR) today announced it has been named a winner in the 2016 UBM Americas ACE Awards in the Power category. The awards program honors the people and companies behind the technologies and products that are changing the world of electronics.

 

The winners were announced at an awards ceremony on Wednesday, December 7, at the San Jose Convention Center, during the Embedded Systems Conference Silicon Valley.

 

“Vicor’s 48V Direct-to-POL product families exemplify the benefits of the Power Component Design Methodology, equipping designers to architect high performance datacenter solutions – from the power source to the point of load – using modular, building block components,” said Robert Gendron, Vice President, Product Marketing, Vicor Power Components. “This honor from UBM Americas is a testament to our significant investment in power electronics innovation and our continued commitment to helping our customers achieve the highest levels of power performance and design flexibility.”

 

Optimized for system loads (CPUs, GPUs, ASICs, and DDR memory) requiring operating voltages at or below 1.8 Volts at load currents up to hundreds of Amperes, Vicor’s 48V Direct-to-POL product families enable system designers to implement datacenter and distributed power solutions featuring high conversion efficiency and low distribution loss in a fraction of the space required by legacy 12V solutions. Incorporating advances in control, power train and packaging technology, these products comprise non-isolated ZVS Buck-Boost Pre-Regulator modules (PRMs) and isolated Voltage Transformation Modules (VTMs). When configured in a “Factorized Power Architecture,” a PRM receives its input from a 48V distributed bus and delivers a controlled, “factorized” voltage to the input of a VTM. The output voltage of the VTM is the factorized voltage multiplied by a fixed conversion ratio K (e.g. K = 1/40) and the output current of the VTM is 1/K (e.g. 1/K = 40) times the VTM input current. Current multiplication at the POL delivers higher efficiency, density, and bandwidth, all of which are distinguishing attributes of Factorized Power.

 

"We're excited to honor this robust group for their dedication to their craft and efforts in bettering the industry for years to come," said Nina Brown, VP Events, UBM Americas. "The judging panel was given the difficult task of selecting winners from an incredibly talented group of finalists and we'd like to thank all of those participants for their amazing work and also honor their achievements. These awards aim to shine a light on the best in today's electronics realm and this group is the perfect example of excellence within both an important and complex industry."

 

A panel of EE Times and EDN editors narrowed down the entries to three finalists in each category, based on the criteria set forth in an online submission form. Winners are determined from among the finalists by a panel of independent judges. For more information on the awards program visit http://ubm-ace.com/.

 

001x001px_alpha.png
001x001px_alpha.png
001x001px_alpha.png
PR-Wordmark.jpg
 
Follow Vicor on Social Media
Twitter: @VicorPower »
Vicor Corporation on LinkedIn »
Vicor PowerBlog »
001x001px_alpha.png

About Vicor Corporation
Headquartered in Andover, Massachusetts, Vicor Corporation, manufactures and markets innovative, high-performance modular power components, from power modules to semiconductor-centric solutions, to enable customers to efficiently convert and manage power from the power source to the point of load. www.vicorpower.com

 

About UBM Americas
HUBM Americas, a part of UBM plc, is the largest business-to-business events and trade show organizer in the U.S. Through a range of aligned interactive physical and digital environments, UBM Americas increases business effectiveness for both customers and audiences by cultivating meaningful experiences, knowledge and connections. UBM Americas has offices spanning North and South America, and serves a variety of specialist industries with dedicated events and marketing services covering everything from fashion, tech and life sciences to advanced manufacturing, cruise shipping, specialty chemicals, powersports and automotive, concrete, hospitality, cargo transportation and more. For more information, visit: www.ubmamericas.com.

 

About Advanced Manufacturing Expos & Conferences
UBM's Advanced Manufacturing portfolio is the leading B-to-B event producer, publisher, and digital media business for the world's $3 trillion advanced, technology-based manufacturing industry. Our print and electronic products deliver trusted information to the advanced manufacturing market and leverage our proprietary 1.3 million name database to connect suppliers with buyers and purchase influencers. We produce more than 50 events and conferences in a dozen countries, connecting manufacturing professionals from around the globe. The Advanced Manufacturing portfolio is organized by UBM Americas, a part of UBM plc (UBM.L), an Events First marketing and communication services business. For more information, visit www.ubmamericas.com.

 

###

 

Vicor, VTM, PRM and Factorized Power are trademarks of Vicor Corporation

 

 

For more information on UBM Americas please contact:

 

Riley Allison
Event Coordinator
UBM Advanced Manufacturing
T: 310-445-4292                  

 

 

For more information on Vicor Corporation please contact:

 

Colin Boroski
Rainier Communications
T: 508-475-0025 x 142
cboroski@rainierco.com