Custom Power Solutions for Military COTS
4 Output AC-DC Shipboard Supply with Battery Charger
This unit is a four output 345 Watt power system with a
10 second battery backup capability, and an integral
heat exchanger. Backup is a 24 volt battery.
2 Output Autoranging AC-DC Supply
This single output supply can be configured as a 28 Vdc,
630 Watt unit or a 15 Vdc, 330 Watt unit. It is forced air
cooled via a pair of internal cooling fans. Remote sense,
single wire current sharing, and remote voltage trim are
additional features.
Single Output AC-DC Shipboard Supply
This high reliability supply carries MIL STD approvals for
shock, vibration, and EMI/EMC conformance
6 Output AC-DC Rack Mount Supply
This 19" rack mounted multiple output power supply
has 115Vac single phase 60Hz input. It can power
share in arrays of up to four. Each supply delivers
900 Watts of total power.
6 Output AC-DC Supply
This multiple output power supply delivers a total of
254 Watts from a 115Vac input. Suitable for harsh
environments, this unit is conformal coated and uses
hermetically sealed semiconductors. Front end
filtering provides EMI compliance to MIL-STD-461D.
20 Output AC-DC Airborne Supply
This rugged multiple output power supply is designed
for high levels of shock and vibration and incorporates
extensive custom, over-voltage, over-load and fault
reporting circuits. It also has front-end filtering that is
compliant with MIL-STD-461D.
24 Output AC-DC Airborne Supply
This rugged multiple output power supply is designed
for high levels of shock and vibration and incorporates
extensive custom, over-voltage, over-load and fault
reporting circuits. It also has front end filtering
compliant with MIL-STD-461D.
2 Output High Frequency AC-DC Airborne Supply
This high power AC input supply is the main power
converter for a remote controlled surveillance drone.
Designed to run off of a 3 phase, 4-5 kHz input,
it features high reliability and power density.
6 Output AC-DC Rack Mount Supply
This medium power AC input, multi-output supply
features 6 outputs and power factor correction. It is
packaged in a 3U high, 19" rack mount configuration.
8 Output AC-DC Rack Mount Supply
This high power AC input, multi-output supply features 8
outputs and power factor correction. It is packaged in a
3U high,19" rack mount configuration.
4 Output AC-DC Airborne Supply
This high density 115 Vac, 400 Hz input, multiple
output power supply is capable of four outputs at 375
Watts. It is qualified to MIL-STD-461 and up to 10 G
vibration levels. All outputs are independently isolated
and regulated
6 Output AC-DC Airborne Supply
This high density 115 Vac, 400 Hz input, multiple
output power supply is capable of six outputs at 375
Watts. It is qualified to MIL-STD-461 and up to 10 G
vibration levels. All outputs are independently isolated
and regulated
2 Fully Redundant Output AC-DC Supply
This ruggedized power supply has autoswitching
115/230 Vac input. Output power is 600 Watts and,
other than the EMI filter, this supply is completely
redundant internally. It is ruggedized for shock and
vibration environments.
3 Output AC-DC Shipboard Supply
This compact AC input, 3 output supply can mount
directly to a ship's bulkhead with captive screws
for conduction cooling
Dual Output AC-DC High Vibration Tolerant Supply
This rugged, rack mounted AC/DC power supply provides
two independent DC outputs
6 Output AC-DC or DC-DC Supply
This power system comes in configurations designed
for either single or three phase 115Vac 400Hz
power or for 28Vdc power. It includes
complete fault monitoring and system interface logic,
and is ruggedized for shock and vibration environments.
7 Output AC-DC or DC-DC Supply
This flexible AC or DC input supply offers up to 7 outputs
and can be powered from shipboard, aircraft, or track
vehicle.
Single Output High Density DC-DC Supply
This 28V input high density power supply provides
26.5 Amps at 60Vdc and is conformal coated for
added protection in harsh environments. Input
filtering makes this supply compliant to EMI
requirements of MIL-STD-461D.
Variable Output DC-DC VME Power Supply
This ruggedized power system for portable test equipment
is configured from individual VME power cards. The
output of each card can be digitally controlled to
provide 0 to 40 Vdc of output up to 5 Amps, for a
maximum of 200 Watts.
2 Output DC-DC Airborne Supply
This high density COTS DC input, dual output, dual output supply is
fully qualified to rugged environmental requirements,
including HALT testing and MIL-STD-461 EMI. It
provides + 45 Vdc at 20 Watts for each output
2 Output DC-DC Airborne Supply
This high density COTS DC input, dual output supply is
fully qualified to rugged environmental requirements,
including HALT testing and MIL-STD-461 EMI. It
provides +25 VDC at 100 Watts for each output.
3 Output DC-DC Airborne Supply
This 168 Watt solution provides 3 outputs in a
ruggedized supply to power analog circuitry from a
28 Vdc battery input.
2 Output DC-DC Airborne Supply
This 168 Watt supply provides 2 outputs in a ruggedized
supply to power logic circuitry form a 28 Vdc battery
input.
4 Output DC-DC Supply
This high-density power supply provides a total of 9
outputs from a nominal 28Vdc input. Total power is
250 Watts. Three of the 9 outputs are user-
programmable for dynamic shifting of the output
voltage to accommodate system requirements.
3 Output DC-DC High Vibration Tolerant Supplies
These rugged supplies operate in a high vibration
environment and the enclosures are cast aluminum.
All ouputs are adjustable and produce very low noise.
Power Design Resources