Skip to main content
Dallas-Fort Worth Fall 2020
High-Performance Power Conversion Seminar & Workshops View Agenda

Keynote speaker:
Dr. Ray Ridley

President, Ridley Engineering, Inc.

Dr. Ridley has been designing, researching, and teaching power electronics for over 40 years. His teaching style is renowned for applying advanced theory to practical design. He is very active in creating software and hardware development tools for designers. Thousands of engineers in 72 countries have taken his courses and use his products in the design process. His landmark work on current-mode control defined how the system should be analyzed and has remained the standard for over 30 years. Learn more

Dr. Ray Ridley

Agenda

Mouser Corporate Headquarters 1000 N Main St, Mansfield, TX 76063


Registration


Welcome


Keynote by Dr. Ray Ridley


Coffee break


Track A 

Workshop: EMI challenges and troubleshooting techniques

Presented by Applications Engineering

Without proper consideration, EMI can derail projects and create costly delays. With a real-world troubleshooting example, you will learn about basic EMI measurement, common and differential noise sources and identification methods, conducted EMI pre-compliance testing, layout issues, etc.

Track B 

Workshop: Modular DC-DC system design done right

Presented by Applications Engineering

Real-world systems comprise more than just the DC-DC converter itself. Using a case study to examine the requirements of module integration into a DC-DC system, you will learn topics such as input and output filtering, protections, compatibility with the source and load dynamics.


Lunch


Track A 

Workshop: Avoiding common AC-DC design pitfalls

Presented by Applications Engineering

Design-in of AC-DC front end modules can be complicated. This session will provide a straightforward approach for success, covering such topics as source impedance considerations, inrush current, filter resonance and damping, PFC, faults, fusing, system stability and safety.

Track B 

Workshop: High-performance PCB layout and thermal design techniques

Presented by Applications Engineering

Our experts will share their optimization techniques addressing the following topics: applying thermal models and simulation, PCB layout for effective thermal management, power/signal routing and integrity in high density, high current applications to minimize board losses and maximize performance.


Coffee break


Track A  

Workshop: Avoiding common AC-DC design pitfalls

Presented by Applications Engineering

Design-in of AC-DC front end modules can be complicated. This session will provide a straightforward approach for success, covering such topics as source impedance considerations, inrush current, filter resonance and damping, PFC, faults, fusing, system stability and safety.

Track B 

Workshop: Modular DC-DC system design done right

Presented by Applications Engineering

Real-world systems comprise more than just the DC-DC converter itself. Using a case study to examine the requirements of module integration into a DC-DC system, you will learn topics such as input and output filtering, protections, compatibility with the source and load dynamics.


Wrap up & Networking


協賛

Mouser

Registration

This event is a professional seminar with limited seats. Your company information is required for your registration.  Limit five (5) attendees from each company.

有効な情報をご入力ください。

Register

エラー

フォーム送信中にエラーが発生しました