1

Select
Category

AC-DC

Converters

Mouseover your specific AC-DC product family to get detailed product specifications.

2

Select
AC-DC Converters

PFM

PFM™ Isolated AC-DC Converters with PFC
Input		85 – 264 V_RMS
Output		24 and 48 V_DC isolated and regulated output
Power		400 W
Efficiency		Up to 92%
Dimensions		PFM 4914: 4.37 x 1.42 x 0.37 in 125 x 36 x 9.4 mm PFM 4414: 4.92 x 1.42 x 0.37 in 111 x 36 x 9.4 mm

Benefits		Just add input voltage rectification, MOV, and hold-up caps for simple, small and flexible AC-DC design. Simple, modular complete solution to achieve benchmark performance from source to point of load.

Input Modules

Mouseover your specific AC-DC product family to get detailed product specifications.

2

Select
AC-DC Input Modules

AIM

AIM™ AC Input Front-end Module
Input		85 – 264 V_AC
Output		Rectified AC line voltage (non-isolated)
Power		Up to 450 W
Efficiency		Up to 98%
Dimensions		1714 VIA 1.76 x 1.40 x 0.37 in 44.6 x 35.5 x 9.3 mm Half Brick : 2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm

Benefits		Accepted worldwide Reduced or eliminated heat sink requirements reducing system cost Proven reliability, reducing field failure and overall end cost

ARM

ARM™ Autoranging Rectifier Module
Input		90 – 132 V_AC 180 – 264 V_AC
Output		Compatible with Vicor 300 V_IN DC-DC converters
Power		Up to 1500 W
Efficiency		96 – 98% (Typical)
Dimensions		2.28 x 1.45 x 0.50 in 57.9 x 36.8 x 12.7 mm

Benefits		Best in class efficiency reducing system usage cost Operates in extreme environments Reduce time to market Intelligent diagnostics Universal operations and acceptance

ENMods

ENMods™ PFC Front End
Input		90 – 132 V_AC 180 – 264 V_AC
Power		575 W
Efficiency		94 – 97% (Typical)
Dimensions		2.28 x 2.20 x 0.50 in 57.9 x 55.9 x 12.7 mm

Benefits		Harmonic current attenuation to EN61000-3-2

FARM

FARM™ Filter Autoranging Rectifier Module
Input		90 – 132 V_AC 180 – 264 V_AC
Output		Compatible with Vicor 300 V_IN DC-DC converters
Power		Up to 1000 W
Efficiency		96% (Typical)
Dimensions		2.28 x 2.20 x 0.50 in 57.9 x 55.9 x 12.7 mm

Benefits		AC Front end module for 300 V_IN DC-DC converters EMI filtering Autoranging line rectification Inrush current limiting

HAM

HAM™ AC Harmonic Attenuator Module (PFC Front End)
Input		85 – 264 V_AC
Output		Up to 675 W
Efficiency		Up to 94%
Dimensions		4.6 x 2.4 x 0.5 in 116.9 x 61.0 x 12.7 mm

Benefits		0.99 Power Factor EN61000-3-2 Harmonic content Universal input: 85 – 264 V_AC Short circuit protection Booster modules available for higher power

Power Systems

Mouseover your specific AC-DC product family to get detailed product specifications.

2

Select
AC-DC Power Systems

FlatPAC

FlatPAC™ 50 – 600 Watt Power System
Input		115/230 V_AC, Autoranging
Number of Outputs		1 to 3
Output		2 – 95 V_DC
Power		Up to 600 W
Dimensions		Three package configurations

Benefits		EN55022 Class B EMI Single, dual or triple outputs 40 mS holdup Finned or conduction-cooled, low profile case Custom output voltages available

FlatPAC-EN

FlatPAC-EN™ AC-DC Power Supply
Input		90 – 132 V_AC 180 – 264 V_AC , Autoranging; 47 – 63 Hz AC 250 – 380 V_DC

Output		1 – 95 V_DC
Power		Up to 500 W
Dimensions		1.4 x 5.0 x 9.2 in 35.6 x 127.0 x 233.7 mm

Benefits		User configurable supply with 1 to 4 outputs Protective features: inrush limiting, transient protection, EMI filtering Operates in conduction and convection applications Meets EN61000-3-2 European harmonic requirements

LoPAC

LoPAC Family™ AC-DC and DC-DC Power Supplies
Input		85 – 264 V_AC , Universal; 47 – 500 Hz AC 100 – 300 V_DC

Output		1 – 285 V_DC
Power		Up to 1500 W
Dimensions		Three chassis sizes

Benefits		User-configurable supplies (1 to 6 outputs) Protective features - inrush limiting, transient protection, EMI filtering Fan-cooled power supplies with high power density Fully compliant with global standards RoHS certified models available

MegaPAC

MegaPAC™ – AC-DC and DC-DC User Configurable Power Supplies
Input		PFC Models : 85 – 264 V_AC , Universal; 47 – 500 Hz AC 100 – 380 V_DC
		3 Phase Models : 180 – 240 V_AC 47 – 500 Hz AC 260 – 352 V_DC
Output		1 – 400 V_DC
Power		Up to 4000 W
Efficiency		>80%

Benefits		User-configurable and field-configurable power supplies with up to 20 outputs and compliant with global standards. Includes inrush limiting, transient protection, EMI filtering.

PowerBank

PowerBank™ AC-DC & DC-DC Power Supply
Input		85 – 230 V_AC 24 / 48 / 300 V_DC
Output		1.8 to 52 V; Up to 160 A
Power		Up to 1500 W
Operating Temp.		-20°C to +50°C at full load
Dimensions		See data sheets

Benefits		19" rack-mount, 1U Internal fans, conduction or convection cooling Up to six configurable outputs Power OK signal, ON/OFF control input

VIPAC

VIPAC™ Power System 50 – 900 Watt
Input		115/230 V_AC, Autoranging; 47 – 440 Hz
Output		2 – 48 V_DC
Power		50 – 500 W / output; Up to 900 W total
Dimensions		See mechanical drawings on data sheet

Benefits		User-configurable AC power supply with short lead-times Single, dual or triple outputs Protective features - Inrush current limiting, transient protection, EMI filtering Choice of output terminations: LugMate or PlugMate Rugged low profile coldplate solution Heat sink platforms available

Custom Solutions

Vicor Custom Power
Vicor Custom Power maintains the flexibility of a small entrepreneurial company while taking advantage of Vicor's technical and business resources to deal effectively with your most challenging power requirements.
Vicor has invested in the tools and resources to offer you full service solutions from prototype to mass production with short leadtimes and the lowest risk.

DC-DC

Isolated Regulated

Mouseover your specific DC-DC product family to get detailed product specifications.

2

Select
DC-DC Isolated Regulated

DCM

DCM™ DC-DC Converter Module
Input		16 – 50 V_DC 18 – 36 V_DC 36 – 75 V_DC 160 – 420 V_DC
Output (SELV)		5, 12, 13.8, 15, 24, 28, 36, 48 V
Power		4623 ChiP: Up to 600 W 3623 ChiP: Up to 320 W 3714 VIA: Up to 600 W 3414 VIA: Up to 320 W
Efficiency		Up to 93%
Dimensions		4623 ChiP: 47.91 x 22.80 x 7.26 mm 3623 ChiP: 38.72 x 22.80 x 7.26 mm 3714 VIA: 95.3 x 35.6 x 9.4 mm 3414 VIA: 85.9 x 35.6 x 9.4 mm

Benefits		High power density Saves board area, materials and total system cost

PI31xx Converter

Isolated DC-DC Converter Modules
Input		48 V (36 – 75 V) Comms. 28 V (16 – 50 V) M-Grade 24 V (18 – 36 V) Industrial
Output		3.3, 5, 12, 15 V
Power		50 W / 60 W (dependent upon converter model)
Efficiency		Up to 87%
Dimensions		0.87 x 0.65 x 0.265 in 22 x 16.5 x 6.7 mm

Benefits		Complete DC-DC isolated power converter enabling up to 60 W in a just over ½ in² surface mount package.

PRM + VTM

PRM™ Regulator and VTM™ Current Multiplier
Input		18 – 75 V
Output		0 – 60 V
Current		Up to 130 A
Efficiency		Up to 97% per module
Dimensions		Full Chip: 32.50 x 22.00 x 6.73 mm Half Chip: 22.00 x 16.50 x 6.73 mm 0623 ChiP: 22.50 x 8.41 x 4.50 mm 1323 ChiP: 22.50 x 15.47 x 4.50 mm

Benefits		The PRM and VTM create an isolated, DC-DC solution with industry-leading efficiency and power density.

Maxi, Mini, Micro Brick

Maxi, Mini, Micro DC-DC Converters
Input		24 V (18 – 36 V) 28 V (9 – 36 V) 48 V (36 – 75 V) 72 V (43 – 110 V) 110 V (66 – 154 V) 150 V (100 – 200 V) 300 V (180 – 375 V) 375 V (250 – 425 V)

Output		2 – 54 V_DC
Power		Up to 600 W
Efficiency		Up to 87%
Dimensions		Full-brick, half-brick and quarter-brick packages
Benefits		Designed for parametric flexibility, this family can be configured to suit application needs. Broad range of support modules available to assemble a total power solution, or to configure a fully housed power system.

VI-200 / VI-J00 Brick

VI-200™/VI-J00™ DC-DC Converters
Input		10 – 400 V_DC
Output		2 – 95 V_DC
Power		VI-200: 50 – 200 W (booster modules for higher power) VI-J00: 25 – 100 W
Dimensions		VI-J00 (half brick) : 2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm
		VI-200 (full brick) : 4.6 x 2.4 x 0.5 in 116.9 x 61.0 x 12.7 mm

Benefits		Up to 50 W/in³ Remote sense and current limit Overvoltage protection, thermal shutdown

BatMod

BatMod™ Current Source Modules
Input		48, 150, 300 V_DC
Output		12, 24, 48 V_DC
Power		200 W (booster modules for additional power)
Dimensions		4.6 x 2.4 x 0.5 in 116.8 x 61.0 x 12.7 mm

Benefits		Ideally suited for equipment requiring a controlled current output such as battery chargers, metal platers, and CW laser diode arrays. Output voltage, current, charge rate and charge time parameters are extremely programmable to meet a wide range of charging requirements.

Isolated Fixed Ratio

Mouseover your specific DC-DC product family to get detailed product specifications.

2

Select
DC-DC Isolated Fixed Ratio

HV BCM

BCM® – High Voltage Bus Converter Module
Input		260 – 410 V 330 – 365 V 360 – 400 V
Output		From: 8.1 – 51.3 V
Current		Full Chip: Up to 28 A 6123 ChiP: Up to 125 A 4414 VIA: Up to 125 A
Efficiency		Up to 97.9%
Dimensions		Full Chip : 32.50 x 22.00 x 6.73 mm 6123 ChiP : 63.34 x 22.80 x 7.26 mm 4414 VIA : 111 x 36 x 9.4 mm 4.37 x 1.42 x 0.37 in.

Benefits		Fast response time Low noise Saves board area, materials and total system cost

LV BCM

BCM® – Low Voltage Bus Converter Module
Input		38 – 55 V
Output		From: 2.4 – 55.0 V
Current		Full/Half Chip: Up to 70 A 6123 ChiP: Up to 150 A 3814 VIA: Up to 150 A
Efficiency		Up to 97.9%
Dimensions		Full Chip : 32.50 x 22.00 x 6.73 mm Half Chip : 22.00 x 16.50 x 6.73 mm 6123 ChiP : 61.00 x 25.14 x 7.26 mm 3814 VIA : 3.76 X 1.4 X 0.37 in.

Benefits		Fast response time Low noise Saves board area, materials and total system cost

IBC

VI Brick® Intermediate Bus Converter
Input		48 V_DC (38 – 55 V_DC) 50 V_DC (36 – 60 V_DC) 54 V_DC (36 – 60 V_DC with 75 V transient)
Current		Up to 80 A
Power		Up to 850 W
Efficiency		Up tp 98.2%
Transfer Ratio		5:1 and 4:1
Dimensions		1/8 Brick and 1/4 Brick

Benefits		Highest efficiency in the industry Highest power available in 1/8 or 1/4 brick industry-standard pin out Full power operation at 55°C and 200LFM (1M/S) airflow

VTM

VTM™ Current Multiplier
Input		0 – 60 V
Output		0 – 55 V
Current		Up to 135 A
Efficiency		Up tp 96%
Dimensions		Full Chip : 32.50 x 22.00 x 6.73 mm Half Chip : 22.00 x 16.50 x 6.73 mm 0623 ChiP : 22.50 x 8.41 x 4.50 mm 1323 ChiP : 22.50 x 15.47 x 4.50 mm

Benefits		High density point-of-load conversion, increases overall system efficiency and lowers operating costs

Non-Isolated Regulated

Mouseover your specific DC-DC product family to get detailed product specifications.

2

Select
DC-DC Non-Isolated Regulated

Step-Down (Buck) Regulators

Cool-Power ZVS Buck

Cool-Power® ZVS Buck Switching Regulators
Input		12 V_IN nominal (8 to 18 V_IN) 24 V_IN nominal (8 to 36 V_IN) 48 V_IN nominal (36 to 60 V_IN)
Output		Wide output range (1 to 16 V)
Current		8 , 9, 10, and 15 A versions
Efficiency		Up to 96.5% Light load and full load high efficiency performance
Dimensions		LGA SiP : 10 x 14 x 2.56 mm 10 x 10 x 2.56 mm

Benefits		The first and only ZVS buck regulator providing the highest efficiency in its class.

Buck-Boost Regulators

PRM

PRM™ Regulator
Input		48 V (36 – 75 V)
Output		48 V
Power		Up to 500 W
Efficiency		Up to 97%
Dimensions		Full Chip : 32.5 x 22.0 x 6.73 mm Half Chip : 22.0 x 16.5 x 6.73 mm

Benefits		High power ZVS buck/boost technology Configurable Low profile and small form factor

Cool-Power ZVS Buck-Boost

Cool-Power® ZVS Buck-Boost Switching Regulators
Input		16 to 34 V 21 to 60 V
Output		12 to 34 V 21 to 36 V 36 to 54 V
Power		Up to 240 W continuous
Efficiency		Over 98% efficiency at >800 kHz FSW
Dimensions		LGA SiP: 10 x 14 x 2.56 mm

Benefits		General purpose Buck-Boost regulators Parallel capable with single wire current sharing External frequency synchronization / interleaving High-side current sense amplifier

Data Center PRM + VTM

Data Center PRM™ Regulator and VTM™ Current Multiplier
Input		38 – 60 V
Output		0 – 2.3 V
Current		Up to 135 A
Efficiency		Up to 97% per module
Dimensions		LGA SiP : 10 x 14 x 2.5 mm 10 x 10 x 2.5 mm 0623 ChiP : 22.50 x 8.41 x 4.50 mm 1323 ChiP : 22.50 x 15.47 x 4.50 mm

Benefits		These PRMs and VTMs provide high density, high efficiency, and low noise conversion for high performance computing.

Non-Isolated Fixed Ratio

Mouseover your specific DC-DC product family to get detailed product specifications.

2

Select
DC-DC Non-Isolated Fixed Ratio

NBM

NBM™ Bus Converter Module
Input		36 – 46 V 36 – 60 V
Output		7.2 – 12 V 12 – 15.3 V
Power		Up to 2400 W
Efficiency		Up to 97.9%
Dimensions		6123 ChiP: 61.00 x 25.14 x 7.26 mm 3814 VIA : 3.76 X 1.4 X 0.37 in.

Benefits		Fast response time Low noise Saves board area, materials and total system cost Bidirectional

Filters

Mouseover your specific DC-DC product family to get detailed product specifications.

2

Select
DC-DC Filters

Input

QPI

Picor® QuietPower® EMI Input Filter Modules
Input		5 – 80 V_DC
Current		6 – 14 A
Surge Rating 100 ms		100 V
Efficiency		>99% at Full Load
Dimensions		LGA Package 25 x 25 x 4.5 mm 12.4 x 25 x 4.5 mm
EMI/RFI		Bellcore TR-TSY-000513, FCC Level A, EN55022 Level B

Benefits		High density EMI Filter modules save valuable PCB space.

FIAM

FIAM™ Filter Input Attenuator Module
Input		48, 72, 110 V_IN (Nominal)
Output		Compatible with Vicor: 48 V_IN DC-DC Converters 72 V_IN DC-DC Converters 110 V_IN DC-DC Converters

Power		48 V (20 Amps) 72 V (500 W) 110 V (500 W)
Efficiency		98% (Typical)
Dimensions		2.28 x 2.20 x 0.50 in 57.9 x 55.9 x 12.7 mm

Benefits		DC-DC front-end modules for Telecom and Railway applications EMI filtering Inrush current limiting

IAM

IAM™ Input Attenuator Module
Input		24, 48, 300 V_DC
Output		1 – 95 V_DC
Power		Up to 400 W
Efficiency		97% (Typical)
Dimensions		2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm
EMI/RFI		Bellcore TR-TSY-000513, FCC Level A, EN55022 Level B

Benefits		High surge withstand Input polarity protection Logic disable Expansion output for arrays (up to 800 W)

Output

QPO

Picor® QuietPower® Output Ripple Attenuator Modules
Input		0.3 – 30 V_DC
Current		10 and 20 A
Headroom Voltage Range		225 – 525 mV
Attenuation 1 kHz – 500 kHz		30 dB
Dimensions		LGA Package 25 x 25 x 4.5 mm

Benefits		A simple way to ensure a quiet DC-DC output in a simple high density module form.

MicroRAM

Picor® MicroRAM™ Output Ripple Attenuator Module
Input		3 – 30 V_DC
Current		μRAM2(xxx) 20 A μRAM3(xxx) 30 A
Efficiency		98%
Dimensions		2.28 x 1.45 x 0.50 in 57.9 x 36.8 x 12.7 mm

Benefits		Significantly improves load transient response

RAM

RAM™ Ripple Attenuator Module
Input		5 – 50 V_DC
Current		Up to 20 A
Efficiency		93 – 99%
Dimensions		2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm

Benefits		Reduces output ripple to <3 mV p-p Compatible with any VI-200 / VI-J00 converter No adjustments required All converter functions retained (e.g. remote sense, trim) High density half-brick package

Power Systems

Mouseover your specific DC-DC product family to get detailed product specifications.

2

Select
DC-DC Power Systems

ComPAC

ComPAC™ 50 – 600 W DC-DC Power System
Input		24, 48, 300 V_DC
Output		2 – 95 V_DC
Power		Up to 600 W
Efficiency		80 – 90%
Dimensions		Three package configurations

Benefits		Low profile

MegaPAC

MegaPAC™ – AC-DC and DC-DC User Configurable Power Supplies
Input		PFC Models : 85 – 264 V_AC , Universal; 47 – 500 Hz AC 100 – 380 V_DC
		3 Phase Models : 180 – 240 V_AC 47 – 500 Hz AC 260 – 352 V_DC
Output		1 – 400 V_DC
Power		Up to 4000 W
Efficiency		>80%

Benefits		User-configurable and field-configurable power supplies with up to 20 outputs and compliant with global standards. Includes inrush limiting, transient protection, EMI filtering.

VIPAC Array

VIPAC Array™ DC Configurable Power Supply
Input		24, 28, 48, 72, 110, 150, 300, 375 V_DC
Output		2 – 54 V_DC
Number of Outputs		Up to four
Power		Up to 750 W

Benefits		User-configurable power supply with short lead-times Low profile chassis mount solution Highly flexible system Connectorized input and output terminations speed system installation Eight standard chassis configurations offer the user a choice of power and mechanical options

MegaMod

MegaMod™ / MegaMod™ Jr. Chassis-Mount DC-DC Converters
Input		10 – 400 V_DC
Output		2 – 95 V_DC
Power		25 – 600 W

Benefits		Chassis-mount DC-DC converters Low noise ZCS/ZVS power architecture Booster versions available for higher versions Single, dual or triple outputs Custom input and output voltages available

DC MegaPAC

DC MegaPAC™ Configurable DC-DC Power Supply
Input		10 – 100 V
Output		2 – 95 V_DC
Power		Up to 1600 W total power
Number of Outputs		1 to 16 outputs
Operating Temp		Full power to 45°C; Up to 800 W at 65°C
Dimensions		12.0 x 6.0 x 3.4 in 304.8 x 152.4 x 86.36 mm

Benefits		Box-to-box paralleling capability Conducted EMI meets BTR 2511

LoPAC

LoPAC Family™ AC-DC and DC-DC Power Supplies
Input		85 – 264 V_AC , Universal; 47 – 500 Hz AC 100 – 300 V_DC

Output		1 – 285 V_DC
Power		Up to 1500 W
Dimensions		Three chassis sizes

Benefits		User-configurable supplies (1 to 6 outputs) Protective features - inrush limiting, transient protection, EMI filtering Fan-cooled power supplies with high power density Fully compliant with global standards RoHS certified models available

PowerBank

PowerBank™ AC-DC & DC-DC Power Supply
Input		85 – 230 V_AC 24 / 48 / 300 V_DC
Output		1.8 to 52 V; Up to 160 A
Power		Up to 1500 W
Operating Temp.		-20°C to +50°C at full load
Dimensions		See data sheets

Benefits		19" rack-mount, 1U Internal fans, conduction or convection cooling Up to six configurable outputs Power OK signal, ON/OFF control input

Custom Solutions

Vicor Custom Power
Vicor Custom Power maintains the flexibility of a small entrepreneurial company while taking advantage of Vicor's technical and business resources to deal effectively with your most challenging power requirements.
Vicor has invested in the tools and resources to offer you full service solutions from prototype to mass production with short leadtimes and the lowest risk.

Power Path Management

Protection, Distribution, Monitoring

Mouseover your specific Power Path Management product family to get detailed product specifications.

2

Select
Power Path Management Protection, Distribution, Monitoring

Load Switch

Cool Switch

Picor® Cool-Switch®
Drain-to-Source (V_DS)		60 V
Current Rating		12 A
Dimensions		LGA Package 7 x 8 x 2 mm
PI2161 Full Function Load Disconnect Solution

Benefits		High performance electronic circuit breaker solutions enabling low power loss and fast dynamic response.

µRDS(on)FET

µR_DS(on) FET®
Constant Current		60 A
Pulsed Current		150 A
R_DS(ON)		360 µOhms
Drain -to- Source (V_DS)		5 V
Dimensions		LGA 4.1 x 8 mm

Benefits		Industry leading load switch MOSFET with an unprecedented R_DS(on) of 360 µΩ.

Hot Swap

Cool Swap

Picor® Cool-Swap® Hot-Swap / Circuit-Breaker Controller
Input Operating Range		0.9 – 14 V
Fault Detection Time		10 nS
Dimensions		4 x 4 x 0.85 mm

Benefits		Hot-Swap controller offering the coolest performance with True-SOA control.

Active ORing

Cool ORing

Picor® Cool-ORing®
Typ. Reverse Fault Response Time		80 nS
Typ. Reverse Threshold		6 mV
*Internal Mosfet R_DS(ON)		8.5 mΩ
Current Rating		12 A
*PI2127 Full Function ORing Solution

Benefits		High performance Active ORing solutions for high availability systems using redundant power architectures.

MIL-COTS

AC-DC

Mouseover your specific MIL-COTS product family to get detailed product specifications.

2

Select
MIL-COTS AC-DC

Converters

MI-AIM

MIL-COTS MI-AIM™ AC Input Module
Input		85 – 140 V_AC
Output		47 – 440 Hz
Power		250 W
Efficiency		Up to 95%
Dimensions		2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm

Benefits		MIL-STD-461C/D/E EMI compliance MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E compliance for transients MIL-STD-810 environmental compliance

MIL-COTS PFC Front End

MIL-COTS PFC Front End AC-DC Front-End Module
Input		102 – 264 V_AC
Output		375 – 395 V_DC
Power		Up to 1400 W
Operating Temp.		-40°C to +100°C
Dimensions		6.40 x 2.70 x 0.50 in 162.2 x 68.6 x 12.7 mm

Benefits		Reduced overall system cost Up to 0.99 Power Factor High efficiency Rugged construction

DC-DC

Mouseover your specific MIL-COTS product family to get detailed product specifications.

2

Select
MIL-COTS DC-DC

Isolated Regulated

MIL-COTS DCM

MIL-COTS DCM™ DC-DC Converter Module
Input		9.0 – 50 V_DC 16 – 50V_DC 160 – 420 V_DC
Output (SELV)		3.3, 5, 12, 15, 24, 28, 48 V
Power		4623 ChiP: Up to 500 W 3623 ChiP: Up to 320 W
Efficiency		Up to 93%
Dimensions		4623 ChiP : 47.91 x 22.80 x 7.26 mm 3623 ChiP : 38.72 x 22.80 x 7.26 mm

Benefits		High power density Saves board area, materials and total system cost

Cool-Power PI31xx

Isolated DC-DC Converter Modules
Input		48 V (36 – 75 V) Comms. 28 V (16 – 50 V) M-Grade 24 V (18 – 36 V) Industrial
Output		3.3, 5, 12, 15 V
Power		50 W / 60 W (dependent upon converter model)
Efficiency		Up to 87%
Dimensions		0.87 x 0.65 x 0.265 in 22 x 16.5 x 6.7 mm

Benefits		Complete DC-DC isolated power converter enabling up to 60 W in a just over ½ in² surface mount package.

MIL-COTS PRM and VTM

MIL-COTS PRM™ Regulator and VTM™ Current Multiplier
Input		PRM: 16 – 50 V or 38 – 55 V VTM: 26 – 50 V
Output		PRM: 26 – 50 V or 20 – 55 V VTM: 1.08 – 50 V
Power		PRM: Up to 500 W
Current		VTM: Up to 80 A
Efficiency		PRM: Up to 97% VTM: Up to 96.5%
Dimensions		Full Chip : 32.50 x 22.00 x 6.73 mm Half Chip : 22.00 x 16.50 x 6.73 mm

Benefits		The PRM and VTM create an isolated, DC-DC solution with breakthrough performance and flexibility in a rugged, miniature package.

MIL-COTS Maxi, Mini and Micro Brick

MIL-COTS Maxi, Mini, Micro DC-DC Converters
Input		24 V (18 – 36 V) 28 V (9 – 36 V) 48 V (36 – 75 V) 72 V (43 – 110 V) 110 V (66 – 154 V) 150 V (100 – 200 V) 300 V (180 – 375 V) 375 V (250 – 425 V)

Output		2 – 54 V_DC
Power		Up to 600 W
Dimensions		Full, half and quarter-brick packages

Benefits		High efficiency and power density in a brick package

MI-200 / MI-J00 Brick

MI-200™ / MI-J00™ DC-DC Converters
Input		28 V_DC, 155 V_DC 165 V_DC, 270 V_DC
Output		2 – 48 V_DC
Power		Up to 100 W
Efficiency		Up to 90%
Dimensions		MI-200 : 4.6 x 2.4 x 0.5 in 116.9 x 61.0 x 12.7 mm MI-J00 : 2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm

Benefits		Remote sense, current limit, OVP and thermal shutdown Power boosters for higher power outputs

Isolated Fixed Ratio

MIL-COTS High-Voltage BCM

MIL-COTS High-Voltage BCM® Bus Converter
Input		270 V (Nominal)
Output		30.0 – 41.25 V 38.3 – 55.0 V
Power		235 W 270 W
Efficiency		Up to >96%
Dimensions		32.50 x 22.00 x 6.73 mm

Benefits		MIL-STD-704E/F compliant Low weight Can be paralleled to create multi-kW arrays Long life in the harshest environments

Filters

Input

MIL-COTS VI Brick Filter

MIL-COTS VI Brick® Filter
Input		16 – 50 V_DC
Output		16 – 50 V_DC
Power		120 W / 8 A
Efficiency		Up to >96%
Dimensions		48.6 x 27.7 x 9.5 mm

Benefits		MIL-STD-461E/F EMI Compliance (CE and CS) MIL-STD-1275 A/B/D, MIL-STD-704 A-F, and DO-160E (Sec16, Cat. z) input transient compliance Compliant MIL-STD-810, MIL-STD-202 environments

QPI

Picor® QuietPower® EMI Input Filter Modules
Input		5 – 80 V_DC
Current		6 – 14 A
Surge Rating 100 ms		100 V
Efficiency		>99% at Full Load
Dimensions		LGA Package 25 x 25 x 4.5 mm 12.4 x 25 x 4.5 mm
EMI/RFI		Bellcore TR-TSY-000513, FCC Level A, EN55022 Level B

Benefits		High density EMI Filter modules save valuable PCB space.

M-FIAM

MIL-COTS M-FIAM™ Filter Input Attenuator Module
Input		24, 28, 270, 300 V
Current		Up to 25 A
Transient Compliance		MIL-STD-704, MIL-STD-1275, DO-160
Dimensions		M-FIAM : 2.28 x 2.2 x 0.5 in 57.9 x 55.9 x 12.7 mm MVA-FIAM : 4.69 x 3.62 x 0.81 119.4 x 92.0 x 20.6 mm

Benefits		Various transient compliance MIL-STD-461 EMI compliance Inrush current limiting Low profile mounting option

MI-IAM

MIL-COTS MI-IAM™ Input Attenuator Module
Input		28, 270 V_DC
Power		200 W
Efficiency		95%
Dimensions		2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm

Benefits		MIL-STD-461C/D/E EMI compliance MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E compliance for transients MIL-STD-810 environments compliance

Output

MI-RAM

MIL-COTS MI-RAM™ Ripple Attenuator Module
Input		5 – 50 V_DC
Power		10 or 20 A
Efficiency		96 – 99%
Dimensions		2.28 x 2.40 x 0.50 in 57.9 x 61.0 x 12.7 mm

Benefits		Reduces output PARD to <10 mV pp Full attenuation up to 20 A load Compatible with all MI-series units from 5 –50 V_DC output

MIL-COTS MicroRAM

MIL-COTS MicroRAM™ Output Ripple Attenuator Module
Input		3 – 30 V_DC
Power		µRAM2(xxx): 20 A µRAM3(xxx): 30 A
Efficiency		Up to 98%
Dimensions		2.28 x 1.45 x 0.50 in 57.9 x 36.8 x 12.7 mm

Benefits		Combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz.

Power Systems

Mouseover your specific MIL-COTS product family to get detailed product specifications.

2

Select
MIL-COTS Power Systems

Badger

Badger™ MIL-COTS PFC Power Supply
Input		85 – 265 V_AC 47 – 500 Hz 100 – 380 V_DC
Output		Up to 12 isolated outputs
Power		Up to 1800 W at 230 V_AC 800 W at 115 V_AC
Power Factor Correction		0.99 at 115 V_AC; 0.95 at 230 V_AC
Dimensions		13.75 x 7.00 x 2.55 in 349.25 x 177.80 x 64.77 mm

Benefits		EMI compliance: MIL-STD-461E CE 101, 102; CS 101, 114, 115, 116 Transient protection: MIL-STD-704E Environmental: MIL-STD-810E

Custom Solutions

Vicor Custom Power
Vicor Custom Power maintains the flexibility of a small entrepreneurial company while taking advantage of Vicor's technical and business resources to deal effectively with your most challenging power requirements.
Vicor has invested in the tools and resources to offer you full service solutions from prototype to mass production with short leadtimes and the lowest risk.

FlatPAC-EN MI

FlatPAC-EN™ MI
Input		90 – 132 V_AC , 180 – 264 V_AC , Autoranging; 47 – 63 Hz AC 250 – 380 V_DC
Output		1 – 95 V_DC ; 1 to 4 outputs
Power		Up to 500 W total; Up to 425 W with EN61000-3-2 compliance MIL-STD 810 for Shock and Vibration
Dimensions		1.4 x 5.0 x 9.2 in 35.6 x 127.0 x 233.7 mm

Benefits		Operates in conduction and convection applications Meets EN61000-3-2 European harmonic requirements Rugged package for demanding environments: rated to -40°C Conformal-coating option available

Javelin

Javelin™ MIL-COTS PFC Power Supply
Input		85 – 254 V_AC 85 – 380 V_DC
Output		Up to 5400 W
Dimensions		Javelin I : 10.75 x 7.00 x 4.90 in 273.05 x 177.80 x 124.46 mm Javelin II : 9.5 x 7.0 x 4.9 in 241.3 x 177.8 x 124.46 mm Javelin III : 13.0 x 16.0 x 7.0 in 330.2 x 406.4 x 177.8 mm

Benefits		MIL-STD-704E AC Input MIL-STD-461E EMI: CE101, 102; RE101, 102 Shock and vibration to MIL-STD-167-1 MIL-STD-810 & MIL-S-901 Case-to-case paralleling capability

LoPAC MI

LoPAC™ MI AC-DC Switcher Power Supplies
Input		85 – 264, Universal; 47 – 500 Hz AC, 100 – 300 V_DC
Output		1 – 285 V_DC
Power		Up to 1500 W
Dimensions		Three chassis sizes

Benefits		User-configurable supplies with 1 to 6 outputs dependent on model Protective features - inrush limiting, transient protection, EMI filtering Fan-cooled power supplies with high power density Fully compliant with global standards Rugged package for demanding environments -40°C Operation option Conformal-coating option available

MegaPAC MI

MegaPAC™ MI
Universal Input		85 – 264 V_AC 47 – 500 Hz AC 100 – 380 V_DC
Power MegaPAC MI		1200 W @ 115 V_AC 2400 W @ 230 V_AC
Power MegaPAC-HP MI		1200 W @ 115 V_AC 2400 W @ 230 V_AC
Dimensions		3.4 x 6.0 x 12.3 in 86.4 x 152.4 x 312.4 mm

Benefits		Up to 2400 W with active PFC Meets EN61000-1-1 requirements Rugged package for demanding environments: rated to -40°C Conformal-coating option available

MI-ComPAC

MI-ComPAC™ DC Power Supply
Input		28, 270 V_DC
Output		2 – 48 V_DC
Power		Up to 300 W
Efficiency		Up to 81%
Dimensions		Three package sizes

Benefits		One, two or three outputs MIL-STD-461C/D/E EMI compliance MIL-STD-704A-F, 1275A/B/D, and DO-160E compliance for transients

MI-MegaMod

MIL-COTS MI-MegaMod™ DC-DC Converters
Input		28, 155, 165, 270 V_DC
Output		2 – 48 V_DC
Power		Up to 300 W
Efficiency		80 – 90%

Benefits		One, two or three outputs MIL-STD-704D/E/F transient compliance for 28 and 270 V_DC MIL-STD-1399A compliance for 155 V_DC

MIL-COTS VIPAC Array

MIL-COTS VIPAC Array™ Chassis Mount DC-DC Converter
Input		24, 28, and 300 V_DC
Output		0.5 – 48 V_DC
Power		Up to 650 W
Dimensions		Various sizes, see data sheet

Benefits		Configurable single, dual, triple and quad outputs Current share option for high power / redundant operation Simplified input & output hookups Rugged, low profile, coldplate chassis Compliant to MIL-STD810F for vibration and shock

MIL-COTS VIPAC Power Systems

MIL-COTS VIPAC™ Power System
Input		28 V_DC
Output		3.3 – 48 V_DC
Power		Up to 400 W

Benefits		Single, dual or triple outputs MIL-STD-461E EMI compliance Input transient protection - MIL-STD-704E/F (M-FIAM5B) - MIL-STD-704A/E/F and MIL-STD-1275A/B/D (M-FIAM9) Compliant to MIL-STD-810F for shock and vibration

Custom

Vicor Custom Power
Vicor Custom Power maintains the flexibility of a small entrepreneurial company while taking advantage of Vicor's technical and business resources to deal effectively with your most challenging power requirements.
Vicor has invested in the tools and resources to offer you full service solutions from prototype to mass production with short leadtimes and the lowest risk.

AC-DC and DC-DC Turnkey Solutions

Mouseover your specific Custom product family to get detailed product specifications.

2

Select
Custom AC-DC and DC-DC Turnkey Solutions

Learn more about Vicor Custom Power

Vicor Custom Power
Vicor Custom Power maintains the flexibility of a small entrepreneurial company while taking advantage of Vicor's technical and business resources to deal effectively with your most challenging power requirements.
Vicor has invested in the tools and resources to offer you full service solutions from prototype to mass production with short leadtimes and the lowest risk.

Accessories

Mechanical and Electrical Accessories

Mouseover your specific Accessories product family to get detailed product specifications.

2

Select
Accessories Mechanical and Electrical Accessories

Capacitors

Capacitors
We offer a wide variety of capacitor products, including tantalum, ceramic, aluminum electrolytic, and surface mount low ESR polymers.

Magnetics

Magnetics
Used to control AC current and voltage and filter out unwanted electronic signals, our line of magnetics accessories provide high reliability at a low cost.

Sockets

Sockets
for DC-DC Converters

Surface mounting systems for Vicor's Maxi, Mini, Micro and VI-200 / J00 Modules.

Standoffs

Standoffs

Attachment system for Vicor modules.
For use with surfmate, inmate and solder mounted modules.

Thermal Management

Thermal Management
Thermal accessories including heat sinks, thermal pads, and push pins are specifically designed for Vicor's products to deliver the optimal thermal management for your thermal environment.

Component Accessories

Component Accessories
We offer a full range of power component accessories including diodes, rectifiers, fuses, MOVs, and test jacks.

EMI Shields

EMI Shields
Module shields provide EMI shielding around the belly (label side) of the Maxi, Mini, or Micro series modules.

Current Share Boards

Current Share Boards
These Current Share Boards have the ability to divide the output current evenly across active paralleled VI-200/J00 and Maxi, Mini and Micro DC-DC converters.

VIPAC and VIPAC Array Accessories

VIPAC & VIPAC Array Accessories
Mating connectors, holdup boxes, and interconnects designed specifically for VIPAC and VIPAC Array Power Systems.

Interconnects

Interconnects
Vicor provides mating connectors and bus bars specially designed to work with Vicor's power supply products.

Browse
Industries
Use
Tools
Get
Support

FARM™
Filter Autoranging Rectifier Module

Description

The FARM (Filter/Autoranging Rectifier Module) is an AC front-end module which provides EMI filtering, autoranging line rectification and inrush current limiting. The FARM is available in either 500/750 W or 750/1000 W models in a half-brick package measuring only 2.28" x 2.2" x 0.5". The FARM interfaces directly with worldwide AC mains and may be used with Vicor 300 V_IN DC-DC converters to realize an autoranging, high-density, low-profile switching power supply.

Specifications

Input Voltages		90 – 132 V_AC 180 – 264 V_AC
Output		Compatible with Vicor 300 V_IN DC-DC converters
Output Power		Up to 1000 W
Efficiency		96% (Typical)
Dimensions		2.28 x 2.20 x 0.50 in 57.9 x 55.9 x 12.7 mm
		Data Sheet »

Find

Compatible Converters

The FARM – Filter Autoranging Rectifier Module – works
in conjunction with a specific set of Vicor converters to deliver optimal efficiency, power and protection.

To easily view the appropriate converter components needed for the desired FARM, please use the PowerBench Solution Selector tool to locate compatible offerings.

Features & Benefits

AC Front end module for 300 Vin DC-DC converters
EMI filtering
Autoranging line rectification
Inrush current limiting
Half-brick package brick package

Diagram

Functional block diagram: autoranging rectifier.

Click image to enlarge.

Documentation

Application Notes

PDFFARM Application Note »

PDFOffLine Power Supply Using the FARM AC Front-End Module »

PDFSoldering Methods and Procedures for Vicor Power Modules »

Safety Agency

PDFcURus – UL 60950-1, CSA 60950-1 »

PDFcTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1 »

PDFCE Marked – Low Voltage Directive (2006/95/EC) and RoHS Recast Directive (2011/65/EU) »

PDFCB Certificate – IEC 60950-1 »

Packaging Options

2-D Mini-Size Drawings (referring to drawing number 37206)

DXFOutline drawing for Mini DC-DC Converter »

PDFOutline drawing for Mini DC-DC Converter »

3-D Mini-Size Module (referring to drawing number 37206)

STEPMini, short tin / lead pin, slotted baseplate »

IGSMini, short tin / lead pin, slotted baseplate »

STEPMini, short tin / lead pin, threaded baseplate »

IGSMini, short tin / lead pin, threaded baseplate »

STEPMini, short tin / lead pin, through-hole baseplate »

IGSMini, short tin / lead pin, through-hole baseplate »

STEPMini, long tin / lead pin, slotted baseplate »

IGSMini, long tin / lead pin, slotted baseplate »

STEPMini, long tin / lead pin, threaded baseplate »

IGSMini, long tin / lead pin, threaded baseplate »

STEPMini, long tin / lead pin, through-hole baseplate »

IGSMini, long tin / lead pin, through-hole baseplate »

STEPMini, short ModuMate, slotted baseplate »

IGSMini, short ModuMate, slotted baseplate »

STEPMini, short ModuMate, threaded baseplate »

IGSMini, short ModuMate, threaded baseplate »

STEPMini, short Modumate, through-hole baseplate »

IGSMini, short ModuMate, through-hole baseplate »

STEPMini, long ModuMate, slotted baseplate »

IGSMini, long ModuMate, slotted baseplate »

STEPMini, long ModuMate, threaded baseplate »

IGSMini, long ModuMate, threaded baseplate »

STEPMini, long ModuMate, through-hole baseplate »

IGSMini, long ModuMate, through-hole baseplate »

STEPMini, short gold pin (RoHS), slotted baseplate »

IGSMini, short gold pin (RoHS), slotted baseplate »

STEPMini, short gold pin (RoHS), threaded baseplate »

IGSMini, short gold pin (RoHS), threaded baseplate »

STEPMini, short gold pin (RoHS), through-hole baseplate »

IGSMini, short gold pin (RoHS), through-hole baseplate »

STEPMini, long gold pin (RoHS), slotted baseplate »

IGSMini, long gold pin (RoHS), slotted baseplate »

STEPMini, long gold pin (RoHS), threaded baseplate »

IGSMini, long gold pin (RoHS), threaded baseplate »

STEPMini, long gold pin (RoHS), through-hole baseplate »

IGSMini, long gold pin (RoHS), through-hole baseplate »

Related Products

DC-DC

Converters

VI-200, VI-J00		Go

Maxi, Mini, Micro		Go

AC-DC

Power Factor Corrected

PFM™ Isolated AC-DC Converters with PFC		Go

Non Power Factor Corrected

AIM – AC Input Front-end Module		Go

Accessories

Capacitors

X-Cap
(Capacitance)

Part
Number

Vendor
Part Number

RoHS
Compliant

Voltage Rating

Technical Drawing

0.22 µF

04068

F1772-422-2000

Yes

250 Vac

PDF

Part Number	Power	Product Grade	Pin Style	RoHS Compliant	Baseplate	Purchase Online
FARM1C11	500 W / 750 W	–20°C to +100°C	Short	No	Slotted	Add to Cart »
FARM1C12	500 W / 750 W	–20°C to +100°C	Short	No	Threaded	Add to Cart »
FARM1C13	500 W / 750 W	–20°C to +100°C	Short	No	Through hole	Add to Cart »
FARM1C21	500 W / 750 W	–20°C to +100°C	Long	No	Slotted	Add to Cart »
FARM1C22	500 W / 750 W	–20°C to +100°C	Long	No	Threaded	Add to Cart »
FARM1C23	500 W / 750 W	–20°C to +100°C	Long	No	Through hole	Add to Cart »
FARM1CF1	500 W / 750 W	–20°C to +100°C	Short RoHS	Yes	Slotted	Add to Cart »
FARM1CF2	500 W / 750 W	–20°C to +100°C	Short RoHS	Yes	Threaded	Add to Cart »
FARM1CF3	500 W / 750 W	–20°C to +100°C	Short RoHS	Yes	Through hole	Add to Cart »
FARM1CG1	500 W / 750 W	–20°C to +100°C	Long RoHS	Yes	Slotted	Add to Cart »
FARM1CG2	500 W / 750 W	–20°C to +100°C	Long RoHS	Yes	Threaded	Add to Cart »
FARM1CG3	500 W / 750 W	–20°C to +100°C	Long RoHS	Yes	Through hole	Add to Cart »
FARM1CN1	500 W / 750 W	–20°C to +100°C	Long ModuMate	No	Slotted	Add to Cart »
FARM1CN2	500 W / 750 W	–20°C to +100°C	Long ModuMate	No	Threaded	Add to Cart »
FARM1CN3	500 W / 750 W	–20°C to +100°C	Long ModuMate	No	Through hole	Add to Cart »
FARM1CS1	500 W / 750 W	–20°C to +100°C	Short ModuMate	No	Slotted	Add to Cart »
FARM1CS2	500 W / 750 W	–20°C to +100°C	Short ModuMate	No	Threaded	Add to Cart »
FARM1CS3	500 W / 750 W	–20°C to +100°C	Short ModuMate	No	Through hole	Add to Cart »
FARM1E11	500 W / 750 W	–10°C to +100°C	Short	No	Slotted	Add to Cart »
FARM1E12	500 W / 750 W	–10°C to +100°C	Short	No	Threaded	Add to Cart »
FARM1E13	500 W / 750 W	–10°C to +100°C	Short	No	Through hole	Add to Cart »
FARM1E21	500 W / 750 W	–10°C to +100°C	Long	No	Slotted	Add to Cart »
FARM1E22	500 W / 750 W	–10°C to +100°C	Long	No	Threaded	Add to Cart »
FARM1E23	500 W / 750 W	–10°C to +100°C	Long	No	Through hole	Add to Cart »
FARM1EF1	500 W / 750 W	–10°C to +100°C	Short RoHS	Yes	Slotted	Add to Cart »

Mouseover your specific AC-DC product family to get detailed product specifications.

PFM™ Isolated AC-DC Converters with PFC

Mouseover your specific AC-DC product family to get detailed product specifications.

AIM™ AC Input Front-end Module

ARM™ Autoranging Rectifier Module

ENMods™ PFC Front End