800-735-6200
Can’t find a match for your specs? We can design and manufacture turnkey custom power systems that meet your specific needs!
(per module)
(116,9 x 61,0 x 12,7 mm)
(57,9 x 61,0 x 12,7 mm)
The VI-200 and VI-J00 series of DC-DC converters have set the standard for high power, low noise, reliability and ease of use in the component power industry. Thousands of combinations of input voltage, output voltage and power level means not having to compromise when selecting modules for your power system. These power modules are field proven with an installed base of over 10 million units.
Compact and efficient, VI-200 and VI-J00 converters feature wide input voltage ranges, remote sense, enhanced output programmability, and low standby dissipation. Power boosters provide a simple, cost effective solution for higher power requirements; up to kilowatts. VI-200 products also offer output overvoltage protection and thermal shutdown. VI-J00 units can operate to 100°C baseplate temperatures.
These units are available in several different temperature grades (down to -55°C operation and -65°C storage) and with different baseplate styles. The electronic circuitry is fully encapsulated for protection in harsh environments and models are available with integral heat sinks. Call factory for special requirements.
800-735-6200
Soldering Methods and Procedures for Vicor Power Modules »
Powering Dynamic Loads »
Meeting Conducted Noise Standards »
Designing a Power Supply with Multiple Input Options »
Creating High Voltage Outputs »
Using Modular DC-DC Converters to Meet European Standards for Railway Applications »
Current Share Board »
Constant Current Control for DC-DC Converters »
Undervoltage / Overvoltage Lockout »
Download Entire Manual
VI-200, VI-J00 Design Guide and Applications Manual »
Download Individual Chapters
Filter and Front-End Module Chapters
Power System Chapters
General Chapters
These calculator programs allow users to determine values that help with accessory
component selection for power system design.
Trim Resistor Calculators
Trim resistors for fixed output voltage trimming »
Trim resistors for variable output voltage trimming »
Thermal Calculators
Thermal impedance calculator »
Thermal data and heat sink selection tool »
This is a downloadable Excel file.
| VI-/VE-200 and VI-/VE-J00 Modules | ||||
| 2-D Full-Size VI-200 / VE-200 DC-DC Converter Module Drawings | ||||
| Drwg. Number | Description | Download | RoHS | |
| 05429 | Outline drawing for full-size VI-200 / VE-200 DC-DC converter | DXF | PDF |  |
|
| 3-D Full-Size VI-200 / VE-200 Module (referring to drawing number 05429) | ||||
| Non-RoHS, VI-2xx series | STEP | 3D PDF | |||
| RoHS, VI-2xx series | STEP | 3D PDF | |
||
 |
||||
| 2-D Half-Size VI-J00 / VE-J00 DC-DC Converter Module Drawings | ||||
| Drwg. Number | Description | Download | RoHS | |
| 03550 | Outline drawing for half-size VI-J00 / VE-J00 DC-DC converter | DXF | PDF | |
|
| 3-D Half-Size VI-J00 / VE-J00 Module (referring to drawing number 03550) | ||||
| Non-RoHS, VI-Jxx series | STEP | 3D PDF | |||
| RoHS, VI-Jxx series | STEP | 3D PDF | |
||
|
||||
| FinMod Modules (Flangeless package with integral heat sink) | ||||
| 2-D Full-Size FinMod-size Drawings (-F1) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06181 | Outline drawing for full-size FinMod DC-DC converter (-F1) | DXF | PDF | |
|
| 3-D Full-Size FinMod Module (referring to drawing number 06181) | ||||
| Non-RoHS, VI-200 Driver and Booster series with 0.25” longitudinal heat sink (VI-2xx-xx-F1 / VI-Bxx-xx-F1) |
STEP | 3D PDF | |||
| RoHS, VE-200 Driver and Booster series with 0.25” longitudinal heat sink (VE-2xx-xx-F1 / VE-Bxx-xx-F1) |
STEP | 3D PDF | |
||
|
||||
| 2-D Full-Size FinMod-size Drawings (-F2) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06185 | Outline drawing for full-size FinMod DC-DC converter (-F2) | DXF | PDF | |
|
| 3-D Full-Size FinMod Module (referring to drawing number 06185) | ||||
| Non-RoHS, VI-200 Driver and Booster series with 0.25” transverse heat sink (VI-2xx-xx-F2 / VI-Bxx-xx-F2) |
STEP | 3D PDF | |||
| RoHS, VE-200 series with 0.25” transverse heat sink (VE-2xx-xx-F2) | STEP | 3D PDF | |
||
|
||||
| 2-D Full-Size FinMod-size Drawings (-F3) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06159 | Outline drawing for full-size FinMod DC-DC converter (-F3) | DXF | PDF | |
|
| 3-D Full-Size FinMod Module (referring to drawing number 06159) | ||||
| Non-RoHS, VI-200 Driver and Booster series with 0.5” longitudinal heat sink (VI-2xx-xx-F3 / VI-Bxx-xx-F3) |
STEP | 3D PDF | |||
| RoHS, VE-200 series with 0.5” longitudinal heat sink (VE-2xx-xx-F3) | STEP | 3D PDF | |
||
|
||||
| 2-D Full-Size FinMod-size Drawings (-F4) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06161 | Outline drawing for full-size FinMod DC-DC converter (-F4) | DXF | PDF | |
|
| 3-D Full-Size FinMod Module (referring to drawing number 06161) | ||||
| Non-RoHS, VI-200 Driver and Booster series with 0.5” transverse heat sink (VI-2xx-xx-F4 / VI-Bxx-xx-F4) |
STEP | 3D PDF | |||
| RoHS, VE-200 series with 0.5” transverse heat sink (VE-2xx-xx-F4) | STEP | 3D PDF | |
||
|
||||
| 2-D Half-Size FinMod-size Drawings (-F1) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06183 | Outline drawing for half-size FinMod DC-DC converter (-F1) | DXF | PDF | |
|
| 3-D Half-Size FinMod Module (referring to drawing number 06183) | ||||
| Non-RoHS, VI-J00 series with 0.25” longitudinal heat sink (VI-Jxx-xx-F1) | STEP | 3D PDF | |||
| RoHS, VE-J00 series with 0.25” longitudinal heat sink (VE-Jxx-xx-F1) | STEP | 3D PDF | |
||
|
||||
| 2-D Half-Size FinMod-size Drawings (-F2) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06187 | Outline drawing for half-size FinMod DC-DC converter (-F2) | DXF | PDF | |
|
| 3-D Half-Size FinMod Module (referring to drawing number 06187) | ||||
| Non-RoHS, VI-J00 series with 0.5” longitudinal heat sink (VI-Jxx-xx-F2) | STEP | 3D PDF | |||
| RoHS, VE-J00 series with 0.5” longitudinal heat sink (VE-Jxx-xx-F2) | STEP | 3D PDF | |
||
|
||||
| 2-D Half-Size FinMod-size Drawings (-F3) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 05997 | Outline drawing for half-size FinMod DC-DC converter (-F3) | DXF | PDF | |
|
| 3-D Half-Size FinMod Module (referring to drawing number 05997) | ||||
| Non-RoHS, VI-J00 series with 0.25” transverse heat sink (VI-Jxx-xx-F3) | STEP | 3D PDF | |||
| RoHS, VE-J00 series with 0.25” transverse heat sink (VE-Jxx-xx-F3) | STEP | 3D PDF | |
||
|
||||
| 2-D Half-Size FinMod-size Drawings (-F4) | ||||
| Drwg. Number | Description | Download | RoHS | |
| 06157 | Outline drawing for half-size FinMod DC-DC converter (-F4) | DXF | PDF | |
|
| 3-D Half-Size FinMod Module (referring to drawing number 06157) | ||||
| Non-RoHS, VI-J00 series with 0.5” transverse heat sink (VI-Jxx-xx-F4) | STEP | 3D PDF | |||
| RoHS, VE-J00 series with 0.5” transverse heat sink (VE-Jxx-xx-F4) | STEP | 3D PDF | |
||
|
||||
| SlimMod Modules (Flangeless package) | ||||
| 2-D Full-Size SlimMod Module Drawings | ||||
| Drwg. Number | Description | Download | RoHS | |
| 04713 | Outline drawing for full-size SlimMod DC-DC converter | DXF | PDF | |
|
| 3-D Full-Size SlimMod Module (referring to drawing number 04713) | ||||
| Non-RoHS, VI-200 series SlimMod (VI-2xx-xx-S) | STEP | 3D PDF | |||
| RoHS, VEI-200 series SlimMod (VE-2xx-xx-S) | STEP | 3D PDF | |
||
|
||||
| 2-D Half-Size SlimMod Module Drawings | ||||
| Drwg. Number | Description | Download | RoHS | |
| 04712 | Outline drawing for half-size SlimMod DC-DC converter | DXF | PDF | |
|
| 3-D Half-Size SlimMod Module (referring to drawing number 04712) | ||||
| Non-RoHS, VI-J00 series SlimMod (VI-Jxx-xx-S) | STEP | 3D PDF | |||
| RoHS, VE-J00 series SlimMod (VE-Jxx-xx-S) | STEP | 3D PDF | |
||
|
||||
|
BusMods (Terminal blocks) for VI-200 / VI-J00-size modules |
|||
| 2-D BusMod Drawings | |||
| Drwg. Number | Description | Download | RoHS |
| 06322 | Rugged chassis-mount housing for VI-200 module * (add-B1 suffix to module number for preinstalled) |
DXF | PDF | |
| 18952 | Rugged chassis-mount housing for VI-J00 module (add-B1 suffix to module number for preinstalled) |
DXF | PDF | |
| * Not for use with HAM module. |
|
||
|
|||
PowerBench™ – VI-200 / VI-J00 Product Configurator »
The VI-200 / VI-J00 configurator allows you to select from the largest offering of DC-DC converter products in the industry. By selecting input voltage, output voltage, power level, and grade you will receive a part number, price, and delivery date.
|
VI-200 / VE-200 Family DC-DC Converters |
cURus – UL 60950-1, CSA 60950-1 |
|
VI-J00 / VE-J00 Family DC-DC Converters |
cURus – UL 60950-1, CSA 60950-1 cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1 CE Marked – Low Voltage Directive (2006/95/EC) CB Certificate – IEC 60950-1:2001 |
IAM - Input Attenuator Module - DC input, front-end module providing transient protection, inrush current limiting and EMI filtering for VI-200 and VI-J00 DC-DC converters.
QPI Family Input Filters - QPIs provide common-mode and differential-mode attenuation from 150 kHz to 30 MHz in a 1.0" x 1.0" (25 x 25 mm) surface mount package.
RAM - Ripple Attenuator Module - The RAM may be connected to VI-200 or VI-J00 converters with output voltages from 5 – 50 Volts, to limit total output noise to less than 3 mV peak-to-peak at loads up to 20 Amps.
MicroRAM - Output Ripple Attenuator Module - The MicroRAM combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from over a range of 3 – 30 Vdc.
QPO Family Output Filters - QPO filters use active filtering to reduce power supply ripple and noise in a 1.0" x 1.0"
(25 x 25 mm) surface mount package.
AIM - AC Input Front-end Module - The AIM is an AC front-end module which interfaces directly with worldwide AC mains to provide line rectification, EMI filtering, transient protection, and inrush limiting.
ARM - Autoranging Rectifier Module - The ARM is the front end of a switching power supply and uses a microprocessor to control strapping of the voltage doubler.
FARM - Filter / Autoranging Rectifier Module - The FARM is an AC front-end module which provides EMI filtering, autoranging line rectification and inrush current limiting.
ENMods - Modular AC Front-end System - The ENMods system combines EMI filtering with the FARM and MiniHAM modules creating an AC front end fully compliant with European norms for harmonic current limits, EMI and input transient immunity.
Off-line Front End - Vicors family of off-line front ends interface any 300 Vin DC-DC converters or configurable products, to 100, 115, 230 or 240 Vac single-phase and 208 Vac three-phase mains.
High-Boost HAM - AC Harmonic Attenuator Module - The HAM module is a full-wave rectifier with a high-frequency zero-current switching (ZCS) boost converter providing up to 675 Watts of power in a full-brick package.
 ORDER PROTOTYPE QUANTITIES: Click on part number below. |
| Terminal block for VI-200 / VI-J00-size modules | ||||||||
| Click img. to enlarge | Description | P/N | RoHS | Technical Drawing | ||||
|
Rugged chassis-mount housing for VI-200 module * (add-B1 suffix to module number for preinstalled) |
06322
|
|
PDF | DXF | ||||
|
Rugged chassis-mount housing for VI-J00 module (add-B1 suffix to module number for preinstalled) |
18952
|
|
PDF | DXF | |||||
| * Not for use with HAM module. |
|
|||||||
|
ORDER PROTOTYPE QUANTITIES: Click on part number below. |
| Click img. to enlarge | Description | P/N | Capacitance | Voltage Rating | RoHS | Technical Drawing | |||||
|
SMT Polymer |
23484-337
|
330 µF | 6.3 V |
|
PDF | DXF | |||||
| SMT Polymer |
23484-477
|
470 µF | 6.3 V |
|
PDF | DXF | ||||||
| SMT Polymer |
23579-227
|
220 µF | 10 V |
|
PDF | DXF | ||||||
|
|
|||||||||||
|
Al-El (10 mm x 16 mm) | 30468
|
270 µF | 25 V |
|
PDF | DXF | |||||
| Al-El (16 mm x 15 mm) | 33985
|
820 µF | 25 V |
|
PDF | DXF | ||||||
| Al-El (10 mm x 16 mm) |
30788
|
68 µF | 63 V |
|
PDF | DXF | ||||||
| Al-El (10 mm x 16 mm) |
30787
|
220 µF | 63 V |
|
PDF | DXF | ||||||
| Al-El (12 mm x 25 mm) |
30799
|
10 µF | 450 V |
|
PDF | DXF | ||||||
|
|
|||||||||||
|
Tantalum |
30800
|
270 µF | 10 V |
|
PDF | DXF | |||||
| Tantalum |
30506
|
120 µF | 20 V |
|
PDF | DXF | ||||||
| Tantalum |
30507
|
68 µF | 30 V |
|
PDF | DXF | ||||||
| Tantalum |
30259
|
27 µF | 50 V |
|
PDF | DXF | ||||||
|
|
|||||||||||
|
Y-Cap Surface Mount |
30802
|
1,500 pF | 250 V |
|
PDF | DXF | |||||
| Y-Cap Surface Mount |
25283
|
4,700 pF | 250 Vac |
|
PDF | DXF | ||||||
| Y-Cap |
00770
|
1,500 pF | 250 Vac |
|
PDF | DXF | ||||||
| Y-Cap | 01000
|
4,700 pF | 250 Vac |
|
PDF | DXF | ||||||
| Y-Cap |
33643
|
0.01 µF | 250 V |
|
PDF | DXF | ||||||
| Y-Cap |
03093
|
0.022 µF | 250 V |
|
PDF | DXF | ||||||
|
|
|||||||||||
| Multilayer Film Cap | 34610
|
0.61 µF | 250 V |
|
PDF | DXF | ||||||
|
ORDER PROTOTYPE QUANTITIES: Click on part number below. |
| Common Mode | ||||||||||||
| Click img. to enlarge | Description | P/N | Inductance | Rated Current | DCR (max) |
RoHS | Technical Drawing | |||||
|
Common-mode input |
31743
|
1,000 µH | 12 A | 6.5 mΩ |
|
PDF | DXF | |||||
| Common-mode input |
32006
|
1,300 µH | 13 A | 14 mΩ |
|
PDF | DXF | ||||||
| Common-mode input |
31943
|
2,163 µH | 1 A | 42 mΩ |
|
PDF | DXF | ||||||
| Common-mode input |
31742
|
3,000 µH | 7 A | 18 mΩ |
|
PDF | DXF | ||||||
|
||||||||||||
|
Common-mode output |
36-00029-06
|
70 µH | 80 A | 0.4 mΩ |
|
||||||
| Common-mode output |
36-00029-07
|
110 µH | 60 A | 0.6 mΩ |
|
|||||||
| Common-mode output |
36-00029-01
|
335 µH | 40 A | 2 mΩ |
|
|||||||
| Common-mode output |
36-00037
|
420 µH | 20 A | 5 mΩ |
|
|||||||
| Common-mode output |
36-00029-04
|
1,270 µH | 10 A | 10 mΩ |
|
PDF | DXF | ||||||
|
|
||||||||||||
| Differential Mode | ||||||||||||
|
|
||||||||||||
|
Differential-mode input |
33206
|
22 µH | 12 A | 5.5 mΩ |
|
PDF | DXF | |||||
| Differential-mode input |
36-00036
|
1,000 µH | 4 A | 250 mΩ |
|
– | ||||||
|
|
||||||||||||
|
Differential-mode output |
30268
|
0.2 µH | 40 A | – |
|
PDF | DXF | |||||
| Differential-mode output |
32012
|
27 µH | 12 A | – |
|
|||||||
| Differential-mode output |
32497
|
1.8 µH | 10 A | – |
|
PDF | DXF | ||||||
|
|
||||||||||||
| Output-sense compensation |
36-00030
|
1,000 µH | – | – |
|
|||||||
|
|
||||||||||||
| Surface Mount | Download Surface-Mount Inductor Data Sheet » | |||||||||||
|
Surface-mount inductor |
31499-16
|
0.37 µH | 100 A | 0.23 mΩ |
|
PDF | DXF | |||||
| Surface-mount inductor |
31499-15
|
0.66 µH | 75 A | 0.42 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-14
|
1.03 µH | 60 A | 0.58 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-13
|
1.48 µH | 50 A | 0.82 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-12
|
2.62 µH | 37.5 A | 1.43 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-10
|
5.90 µH | 25 A | 3.23 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-08
|
13.2 µH | 16.6 A | 7.56 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-05
|
47.4 µH | 8.8 A | 29.4 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-03
|
133 µH | 5.6 A | 81.2 mΩ |
|
PDF | DXF | ||||||
| Surface-mount inductor |
31499-02
|
243 µH | 3.9 A | 156 mΩ |
|
PDF | DXF | ||||||
|
ORDER PROTOTYPE QUANTITIES: Click on part number below. |
| Sockets | |||||||||
| Click img. to enlarge | Description | Pin Size | P/N | RoHS | Technical Drawing | ||||
|
Electro-tin finish | 0.040" |
30074
|
|
PDF | DXF | ||||
| Electro-tin finish | 0.080" |
30075
|
|
PDF | DXF | |||||
|
|
|||||||||
| Standoffs | |||||||||
| Click img. to enlarge | Description | P/N | RoHS | Technical Drawing | |||||
|
Six 0.25" x 0.525 Long Female, 0.25" Hex |
32183-01
|
|
PDF | DXF | |||||
|
ORDER PROTOTYPE QUANTITIES: Click on part number below. |
| Heat sinks used with Vicors VI-200 module (not for Maxi modules) | |||||||||||
| Click img. to enlarge | Description | P/N | RoHS | Technical Drawing | |||||||
|
0.90" Longitudinal Fins |
30089
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
0.90" Transverse Fins |
30090
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
0.70" Longitudinal Fins |
30775
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
0.70" Transverse Fins |
30193
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
1.45" Longitudinal Fins |
30780
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
0.40" Transverse Fins |
30194
|
|
PDF | DXF | |||||||
| Heat Sink Thermal Data and Calculator » | |||||||||||
|
|
|||||||||||
| Heat sinks used with Vicors VI-J00 module (not Mini modules) | |||||||||||
| Click img. to enlarge | Description | P/N | RoHS | Technical Drawing | |||||||
|
0.90" Longitudinal Fins |
30191
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
0.90" Transverse Fins |
30771
|
|
PDF | DXF | |||||||
|
|
|||||||||||
|
0.40" Transverse Fins |
30140
|
|
PDF | DXF | |||||||
|
Heat Sink Thermal Data and Calculator »
|
|||||||||||
| ThermMate Thermal Pads (10 pieces per package) | |||||||||||
| Click img. to enlarge | Description | P/N | Thickness | RoHS | Technical Drawing | ||||||
|
For use with Vicor VII-200 modules* |
20266
|
0.007" |
|
|||||||
| For use with Vicor VI-J00 modules* |
20264
|
0.007" |
|
||||||||
| * NOT for use with Vicor Maxi or Mini modules | |||||||||||
|
|
|||||||||||
| Grounding Clips | |||||||||||
| Click img. to enlarge | Description | P/N | RoHS | Technical Drawing | |||||||
|
For use with FinMod, Longitudinal 0.25" Fins (-F1) |
32185
|
|
PDF | DXF | |||||||
| For use with FinMod, Longitudinal 0.50" Fins (-F2) |
32185
|
|
PDF | DXF | ||||||||
| For use with FinMod, Transverse 0.25" Fins (-F3) |
32186
|
|
PDF | DXF | ||||||||
| For use with FinMod, Transverse 0.50" Fins (-F4) |
32186
|
|
PDF | DXF | ||||||||
| For use with SlimMod Flangless package (-S) |
32187
|
|
PDF | DXF | ||||||||
Made in USA
