
Configuring in small spaces
Learn to break down rails into smaller increments to fit high-power, multi-rail requirements into nontraditional footprints like L-shapes or donuts
Not recommended for new designs.
The PI2211 is a Hot-Swap/circuit-breaker controller for bus voltages of 0.9 – 14V. Unlike conventional Hot-Swap controllers, the PI2211 incorporates True-SOA MOSFET protection which emulates the transient thermal performance of the MOSFET ensuring safe operation. Typical Hot-Swap devices utilize power limiting based upon standard SOA curves without considering transient performance issues. Only the PI2211 with True-SOA emulates and protects the MOSFET under its actual operating conditions considering transient events.
0.9 to 14V operating (21V max) Bus Hot Swap Controller with circuit breaker
Digitally emulates MOSFET transient thermal performance for True-SOA control
Ensures safe DC and transient MOSFET performance by emulating the MOSFET junction temperature rise via a internal digital processor
Limits transient over voltage exposure after breaker event with Glitch-Catcher control
条件で絞り込む
| 製品番号 | Vin Operating Range | Fault Detect Time | Package Size | RoHS Compliant | カートに入れる/詳細を見る | ||
|---|---|---|---|---|---|---|---|
|
PI2211
|
Part Number: PI2211 |
Vin Operating Range:
0.9 – 14 V
|
Fault Detect Time:
100 nS
|
Package Size:
24-Pin QFN / 4 x 4 x 0.85
|
RoHS Compliant: |
Configuring in small spaces
Learn to break down rails into smaller increments to fit high-power, multi-rail requirements into nontraditional footprints like L-shapes or donuts
Meeting transient needs
Mitigate I²R losses and trace inductance by shifting to vertical power placement using advanced multi-phase modules and current multipliers
Powering high current loads
Explore solutions for delivering thousands of amps to demanding loads and evaluate constraints like connector pin scaling and cable sizing
Regulating 48 volts
Learn to deploy non-isolated buck-boost regulators for wide-swing 36 – 60V inputs and implement efficient power regulation using an isolated converter
For California residents see information regarding California Proposition 65
12V、24V、48Vを負荷電圧へ直接変換



