Skip to main content

Communications solutions and case studies

Delivering high current
at very low voltage

Case study: Satellite communications
antenna

Satellite communications antenna

Need for a small, robust and reliable low profile power solution

Need for a small, robust and reliable low profile power solution

Satellite communication usually requires a large dish antenna. In addition, for moving vehicles, planes and boats antenna-positioning motors and controllers are needed to ensure that the antenna accurately tracks the relative position of the satellite. Mounting these cumbersome assemblies in a position to maintain a clear visual satellite connection is often impractical. This customer was developing an electronically steered solid-state phased-array antenna with no positioning motors to significantly reduce the antenna profile. The key goals were:

  • The antenna’s processing signals required a well-regulated 1.5V 80A supply
  • Provide a small, robust and reliable low profile power solution
  • Accommodate future ASIC designs requiring lower core voltage and higher currents

Factorized power provided a more flexible power architecture

Factorized power provided a more flexible power architecture

Factorized Power Architecture (FPA) separates the regulation and voltage transformation stages into separate components. The resultant design flexibility simplified the implementation and met the system requirements of small size and a low profile. Fast load response and high switching frequency eliminated many hold-up capacitors saving space. Key benefits were:

  • Performance maximized by fast response of FPA to ASIC’s pulsed current demands
  • Reduced footprint (11cm2) and ultra-low profile (<7mm)
  • Future ASICs with lower voltages (<1V) and higher currents (+100A) can use the same, scalable, small-footprint architecture

Factorized Power Architecture provides high current to the ASIC in the lowest profile

The Vicor VTM (transformation) supplied the high current 1.5V rail and was placed close to the ASIC. The PRM (regulation) was sited at the PCB edge since its 48V output bus to the VTM carried only low currents and provided reduced bus distribution losses. This arrangement saved space and optimized voltage regulation at the ASIC. To analyze this power chain, go to Vicor Whiteboard online tool.

供電網絡

Power delivery network
PRM regulator modules

PRM 前後變壓穩壓器

輸入:48V (36 – 75V)

輸出:48V (5 – 55V

功率:高達 600W

效率:高達 97%

VTM current multipliers

VTM 電流倍增器

輸入: 0 – 60V

輸出: 0 – 55V

電流: 高達 115A

峰值效率: 高達 96%

小巧至 22.83 x 8.52 x 4.9mm

資源

Contact Form

聯絡Vicor

感謝您與我們聯絡。

您將在一個工作日內收到答覆。